Hard Hats, Hard Hat Accessories, Face Shields and Visors from Bullard and Crews
Legion Safety Products carries a variety of head and face protective gear, including hard hats, hard hat accessories, as well as face shields and visors. Hard hats should generally be worn in areas where workers perform heavy labor and are required in many industries / construction sites where a danger of falling objects is present. Combined with a hard hat accessory, such as a chinstrap and a protective visor, the hard hat becomes a full solution for head and face protection. Legion Safety Products offers hard hats, faceshields, visors and hard hat accessories from Bullard and Crews (MCR Safety).
Click on the sub-categories below to see more products
Bullard A1 Hard Hat - High Impact Polycarbonate Alloy w/ RatchetAdvent A1 hard hat from Bullard was specially designed for industries like forestry, oil and gas drilling, emergency rescue and others. Features a 8-point suspension and meets Type II, E and G class requirements.$84.95ea
Bullard A2 Hard Hat - High Impact Polycarbonate Alloy w/ RatchetThis Cap-Style A2 hard hat from Bullard features a 8-point suspension, thermoplastic outer shell and provides impact and penetration protection from all directions: top, front, sides and rear.$98.95ea
Bullard Classic Full Brim Hard Hat C33 w/ PinlockThe full brim hard hat C33 from Bullard comes with a pinlock 6-point suspension with 1 inch wide nylon straps. Exceeds ANSI Z89.2003, Class E and Type I requirements.$10.95ea
Bullard Classic Full Brim Hard Hat C33R w/ RatchetBullard C33R full brim hard hat features 1 inch wide nylon straps on its 6 point ratchet suspension. This comfortable Bullard hard hat exceeds ANSI Z89.2003, Class E and Type I requirements and adjusts vertically.$14.75ea
Bullard Classic Hard Hat C30 w/ 6-Point Pinlock SuspensionThe C30 Classic series hard hat from Bullard exceeds 1 and Class E requirements. It has a 6-point pinlock suspension with nylon straps and front and rear height adjustments.$9.95ea
Bullard Cotton Brow Pad RBPCOTTONThis replacement brow pad from Bullard is made of absorbent cotton fabric and provides additional comfort to the wearer. Fits all hard hat designs from Bullard.$3.50ea
Bullard CSS Cotton Sunshade - Neck Cover100% cotton sunshade from Bullard will protect the worker's neck from sun exposure. Fits all Bullard hard hats, caps and helmets.$5.95ea
Bullard High Density Polyethylene Hard Hat S51R w/ RatchetThe polyethylene hard hat S51R from Bullard has a 4 point ratchet suspension with 3/4" nylon straps and height adjustments. These hard hats meet ANSI Z89.1-2003 Class E and Class G requirements.$9.50ea
Bullard High Density Polyethylene Hard Hat S61 w/ PinlockHard hat S61 from Bullard features 3 hardness ridges, a 4-point pinlock suspension and vertical adjustments at front and back. It meets ANSI Z89.1-2003 Class G requirements and Class E requirements.$6.75ea
Bullard R540 Reflective StripingThese single-color reflective stipes improve visibility and work group identiication. They can be attached to all Bullard hard hats. Legion Safety carries Hi-Viz green strips for Bullard hard hats.$7.95ea
Bullard Ratchet Suspension RS6RC for Classic Series Hard HatsThe replacement suspension for Bullard Classic series hard hats C30 and C33. This ratchet suspension comes with a cotton brow pad and features two front and three rear vertical adjustments.$10.25ea
Bullard SS6 See Through SunshieldBullard SS6 Sunshield features a see through front for overhead visibility. Protects the face, neck and ears from sun exposure and fits on Bullard hard hat styles C33 and S71.$11.50ea
Chicago Protective Apparel 10 Cal Face Shield KitThis arc flash face shield kit is made with durable dielectric materials that are resistant to heat and comfortably fit on the worker. This kit comes with a hard cap, visor, bracket, and chin guard$75.25Each
Chicago Protective Apparel 8 Cal Face Shield KitThis arc flash face shield kit is made with durable dielectric materials that are resistant to heat and comfortably fit on the worker. Comes with a hard cap, visor, and bracket$68.50Each
MCR Safety Crews Aluminum Faceshield Bracket 102These aluminum faceshield brackets are rigid and light. MCR Safety's bracket 102 is designed to easily attach to most hard hats that do not have a full brim.$6.10ea
MCR Safety Crews Clear Polycarbonate VisorsPolycarbonate visors from Crews are available in two thicknesses. They attach securely to all of MCR Safety's faceshield brackets.$2.35ea
MCR Safety Crews Nylon Faceshield Bracket 101Nylon faceshield bracket from Crews is light and easy to install on most hard hats without a full brim. Its dielectric design makes it safe for electrical work.$3.95ea
MCR Safety Crews Nylon Faceshield Headgear Assy 103Faceshield assemly 103 from MCR Safety is comfortable and econmical. It accepts numerous Crews safety visors and has a sparkguard to protect the hair and head of wearer.$5.45ea
MSA Face Shield Visors, Propionate, UniversalMSA's Propionate universal visors are available in clear and dark green and must be used with safety glasses or goggles to meet ANSI Z87.1-2003 High Impact standards$7.15Each
MSA Skullgard Full Brim Hard Hat 454664 with Staz-On SuspensionMSA’s Skullgard heat resistant hard hat withstand temperature up to 350°F which is ideal for industries where hot temperatures are present. This hard hat meets the ANSI/ISEA Z89.1-2009 (Class G) standard.$87.50Each
MSA Skullgard Full Brim Hard Hat 475407 with Fas-Trac SuspensionSkullgard by MSA is a heat resistant hard hat that can hold up to 350 F temperatures, making it perfect for industries where high heat workers are exposed to heat. This hard hat meets the ANSI/ISEA Z89.1-2009 (Class G) standard.$95.50Each
MSA Skullgard Hard Hat 454617 with Staz-On SuspensionSkullgard is a radiant heat resistant hard cap. Withstands up to 350°F making it perfect for industries where high temperatures is a hazard. Exceeds ANSI/ISEA Z89.1-2009 (Class G)$78.50Each
MSA Skullgard Hard Hat 475395 with Fas-Trac SuspensionThis MSA heat resistant hard cap resists up 350°F which is ideal for laborers working in industries where elevated temperatures are present. This hard cap complies with ANSI/ISEA Z89.1-2009 (Class G).$87.50Each
MSA V-Gard 500 Hard Hats with 4-PT Fas-Trac SuspensionV-Gard 500 vented MSA hard cap has a 4 point Fas-Trac suspension with vents that adds comfort to the user. This hard hat exceeds ANSI/ISEA Z89.1-2009 (Class C) standards.$14.50Each
MSA V-Gard 500 Hard Hats with 6-PT Fas-Trac SuspensionMSA’s V-Gard 500 vented hard cap has a 6 point Fas-Trac suspension. This product exceeds ANSI/ISEA Z89.1-2009 (Class C) standards and meet all applicable requirements for Type 1 (top impact).$16.80Each
MSA V-Gard Freedom Hard Cap 10052945 with Fas-Trac SuspensionFreedom series V-Gard Hard Cap are made out of high-quality, wear-resistant materials. It is lightweight and durable and exceeds ANSI/ISEA Z89.1-2009(Class E) and CSA Z94.1-2005(Class E)$29.50Each
MSA V-Gard Hard Caps with Fas-Trac SuspensionThis MSA V-Gard hard cap comes with a Fas-Trac suspension making it easier to adjust by simply turning a knob. This product also exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) standards.$12.95Each
MSA V-Gard Hard Caps with Staz-On SuspensionSlotted V-Gard hard cap from MSA offers superior impact protection. This comfortable and lightweight cap exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) requirements.$7.95Each
MSA V-Gard Hard Hats, Full Brim with Fas-Trac SuspensionFull-brim non-slotted hard hat with Fas-Trac suspension makes it easy to adjust by turning a knob. This hard hat is available in different colors and exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) standards.$17.25Each
MSA V-Gard Hard Hats, Full Brim with Staz-On SuspensionThis V-Gard full-brim hard hat from MSA offers superior impact protection. It protects the neck and ears from debris. This comfortable hard hat exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) requirements.$11.80Each
Bullard A1 Hard Hat - High Impact Polycarbonate Alloy w/ RatchetAdvent A1 hard hat from Bullard was specially designed for industries like forestry, oil and gas drilling, emergency rescue and others. Features a 8-point suspension and meets Type II, E and G class requirements.$84.95ea
Bullard A2 Hard Hat - High Impact Polycarbonate Alloy w/ RatchetThis Cap-Style A2 hard hat from Bullard features a 8-point suspension, thermoplastic outer shell and provides impact and penetration protection from all directions: top, front, sides and rear.$98.95ea
Bullard Classic Full Brim Hard Hat C33 w/ PinlockThe full brim hard hat C33 from Bullard comes with a pinlock 6-point suspension with 1 inch wide nylon straps. Exceeds ANSI Z89.2003, Class E and Type I requirements.$10.95ea
Bullard Classic Full Brim Hard Hat C33R w/ RatchetBullard C33R full brim hard hat features 1 inch wide nylon straps on its 6 point ratchet suspension. This comfortable Bullard hard hat exceeds ANSI Z89.2003, Class E and Type I requirements and adjusts vertically.$14.75ea
Bullard Classic Hard Hat C30 w/ 6-Point Pinlock SuspensionThe C30 Classic series hard hat from Bullard exceeds 1 and Class E requirements. It has a 6-point pinlock suspension with nylon straps and front and rear height adjustments.$9.95ea
Bullard Classic Hard Hat C30R w/ 6-Point Ratchet SuspensionBullard Classic series hard hat C30R features a ratchet suspension with nylon straps and exceeds ANSI Z89.2003, Class E, and Type 1 requirements.$13.75ea
Bullard Cotton Brow Pad RBPCOTTONThis replacement brow pad from Bullard is made of absorbent cotton fabric and provides additional comfort to the wearer. Fits all hard hat designs from Bullard.$3.50ea
Bullard CSS Cotton Sunshade - Neck Cover100% cotton sunshade from Bullard will protect the worker's neck from sun exposure. Fits all Bullard hard hats, caps and helmets.$5.95ea
Bullard High Density Polyethylene Hard Hat S51R w/ RatchetThe polyethylene hard hat S51R from Bullard has a 4 point ratchet suspension with 3/4" nylon straps and height adjustments. These hard hats meet ANSI Z89.1-2003 Class E and Class G requirements.$9.50ea
Bullard High Density Polyethylene Hard Hat S61 w/ PinlockHard hat S61 from Bullard features 3 hardness ridges, a 4-point pinlock suspension and vertical adjustments at front and back. It meets ANSI Z89.1-2003 Class G requirements and Class E requirements.$6.75ea
Bullard High Density Polyethylene Hard Hat S61R w/ Ratchet4 point ratchet type suspension of this hard hat has 3/4" nylon straps. Bullard S61R hard hats meet the requirements of ANSI Z89.1-2003 Classes E and G.$9.95ea
Bullard R540 Reflective StripingThese single-color reflective stipes improve visibility and work group identiication. They can be attached to all Bullard hard hats. Legion Safety carries Hi-Viz green strips for Bullard hard hats.$7.95ea
Bullard Ratchet Suspension RS4RC for Standard Series Hard HatsThe RS4RC ratchet from Bullard was deisgned for standard model Bullard hard hats S51, S61, S62 and S71. It features vertical height adjustments and a 4-point suspension.$9.25ea
Bullard Ratchet Suspension RS6RC for Classic Series Hard HatsThe replacement suspension for Bullard Classic series hard hats C30 and C33. This ratchet suspension comes with a cotton brow pad and features two front and three rear vertical adjustments.$10.25ea
Bullard S51 Hard Hat - High Density Polyethylene w/ PinlockThis lightweight S51 hard hat from Bullard features a 4-point pinlock suspension, low profile and a low center of gravity. Meets class E and G requirements.$5.95ea
Bullard S62R Hard Hat - High Density Polyethylene Vented w/ RatchetLow profile, light weight, low center of gravity and 4-point ratched suspension are all features of the ventilated S62R Bullard Hard Hat, which meets Class C requirements.$10.95ea
Bullard SS6 See Through SunshieldBullard SS6 Sunshield features a see through front for overhead visibility. Protects the face, neck and ears from sun exposure and fits on Bullard hard hat styles C33 and S71.$11.50ea
Chicago Protective Apparel 10 Cal Face Shield KitThis arc flash face shield kit is made with durable dielectric materials that are resistant to heat and comfortably fit on the worker. This kit comes with a hard cap, visor, bracket, and chin guard$75.25Each
Chicago Protective Apparel 7" x 11" Window Aluminum Retainer$16.25Each
Chicago Protective Apparel 8 Cal Face Shield KitThis arc flash face shield kit is made with durable dielectric materials that are resistant to heat and comfortably fit on the worker. Comes with a hard cap, visor, and bracket$68.50Each